How to dry a Camera
Patience.
What happened: the camera, a nice pocket-able Canon SD1000 was snuggled nicely in a bag. Also in the bag was a nalgene bottle, almost full of the clear liquid known as water. Unbeknown, the lid was not tightly secured, the bottle was upside down, and a litre or so of water filled the bag and drowned the poor little camera.
Kaput.
In the past I’d successfully restored various electronics from immersion with a combination of gentle heat, sunlight and some patience. Stripping the device down as much as possible also helps, as it did with Paul’s phone after it had come off badly in an argument with a bowl of washing up...
So I opened up the camera, removed the SD card and battery, and carefully propped it next to a heating vent to dry.
A day went by, and there was no life to be seen.
A week came and went and the screen began to flickr. Occasionally.
A month later, and the lens started to move. Sometimes.
After another two months I gave up, ordered a replacement SD<something> with more megapixels and Image Stabilization (but not better image quality it turned out), and dropped the SD1000 into a drawer, and tried to forget about it.
Fast forward a couple of months and a hurried exit for an overnight winter hike. In the rush to get up and out I grabbed the wrong camera, only noticing my mistake some hours later when we were already up in the mountains. My heart sank, a little.
Then something unexpected: the camera worked, with focus and exposure improving rapidly with successive pictures:
As ever there’s a lesson to this, I’m just not sure which one:
- Drying electronics out takes a long time and lots of patience.
- Drying electronics out is helped significantly by a reduction in temperature, in this case going from +15 to –10 Celsius in the space of about 6hrs.
- You can break a camera out of a sulk and persuade it to work properly again by making it feel jilted.
Labels: equipment, photography



FEED